[2022] Use Valid New HPE6-A71 Questions - Top choice Help You Gain Success
HPE6-A71 Exam Practice Materials Collection
How to study the HP HPE6-A71: Aruba Certified Mobility Professional Exam
Preparation of certification exams could be covered with two resource types. The first one is the study guides, reference books, and study forums that are elaborated and appropriate for building information from the ground up. Apart from the video tutorials and lectures are a good option to ease the pain of through study and are relatively make the study process more interesting nonetheless these demand time and concentration from the learner. Smart candidates who wish to create a solid foundation altogether examination topics and connected technologies typically mix video lectures with study guides to reap the advantages of each, but HPE6-A71 practice test or practice exam engines is one important study tool that goes typically unnoted by most candidates. HPE6-A71 practice exams are designed with our experts to make exam prospects test their knowledge on skills attained in the course, as well as prospects become comfortable and familiar with the real exam environment. Statistics have indicated exam anxiety plays a much bigger role in a student's failure in the exam than the fear of the unknown. DumpsActual expert team recommends preparing some notes on these topics along with it do not forget to practice HPE6-A71 exam dumps which had been written by our expert team, each of these can assist you loads to clear this exam with excellent marks.
NEW QUESTION 34
An administrator needs to modify a VAP used for a branch office RAP. The VAP's operating mode is currently defined as backup and uses tunnel mode forwarding. The administrator wants to implement split-tunnel forwarding mode in the VAP.
Which WLAN operating mode must the administrator define for the VAP before the tunnel forwarding mode can be changed tosplit-tunnel?
- A. Always
- B. Trusted
- C. Standard
- D. Persistent
Answer: C
NEW QUESTION 35
An administrator defines credentials in the Mobility Master> Configuration> System section to configure a Mobility Master (MM). The administrator then accesses AirWave and adds the MM in Monitor-Only mode.
The administrator expects AirWave to automatically discover the Aruba Virtual Mobility Controllers (VMCs) also managed by the MM, but does not see these under APs/Devices> New section in AirWave.
What should the administrator do to solve this problem?
- A. Enable Automatic Device Authorization for the Group the Mobility Master belongs to in AirWave.
- B. Define the AirWave communication parameters on the Virtual Mobility Controllers, and then scan for the Virtual Mobility Controllers in AirWave.
- C. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and have AirWave repoll the Mobility Master.
- D. Define AirWave communication parameters for the Virtual Mobility Controllers on the MobilityMaster, and then scan for the Virtual Mobility Controllers in AirWave.
Answer: B
NEW QUESTION 36
An administrator supports Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM) in a noncluster deployment. The administrator performs these tasks on the MM for the MCs:
* Enables L3 IP mobility for the respective VAPs on the MCs
* Creates a L3 domain and places the MCs in the domain
However, roaming does not work when users roam from an AP connected to one controller in the domain to an AP connected to a different controller in the domain.
What must the administrator do to fix this problem?
D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Enable L3 IP Mobility globally on the Mobility Controllers.
- B. Configure the same VLANs on the Mobility Controllers in the L3 domain.
- C. Create a home-agent-to-foreign-agent mapping table.
- D. Re-provision the APs associated with the Mobility Controllers.
Answer: C
NEW QUESTION 37
An administrator configures two Mobility Masters (MMs) for redundancy and databasesynchronization.
Which protocol transports database information between the two MMs?
- A. IPSec
- B. VRRP
- C. SNMP
- D. AMON
Answer: B
NEW QUESTION 38
Refer to the exhibit.
The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?
- A. The AP is configured as a RAP to terminate on a stand-alone controller.
- B. The AP is configured as a RAP to terminate on a Mobility Master.
- C. The AP is configured to terminate on a Mobility Controller in a cluster.
- D. The AP is configured to terminate on a non-cluster Mobility Controller.
Answer: B
NEW QUESTION 39
Refer to the exhibit.
An administrator configures acluster with only the members shown in the exhibit. AP load balancing is enabled. There are no other cluster parameters configured. What occurs when a cluster member experiences a failure?
- A. APs reboot and rejoin the cluster.
- B. Connected users are de-authenticated
- C. APs and clients are fully replicated.
- D. High value sessions are synchronized.
Answer: A
NEW QUESTION 40
Which protocol is used to tunnel user traffic when an administrator implements tunneled node between an ArubaOS-Switch and an Aruba Mobility Controller (MC)?
- A. IPSec
- B. PAPI
- C. AMON
- D. GRE
Answer: D
NEW QUESTION 41
A customer uses an SIP application that is not supported by Aruba United Communications and Collaboration (UCC). Which voice deployment mode should the administrator implement on Aruba Mobility Controllers (MCs) to support this application?
- A. QoS-mode
- B. Heuristic mode
- C. SDN-API mode
- D. WMM-only mode
Answer: B
NEW QUESTION 42
An administrator creates a cluster of four Mobility Controllers (MCs). When the administrator verifies the cluster operation, the administrator notices that it is operating as an L3-connected cluster.
What should the administrator do to ensure that the cluster operates as an L2-connected cluster? (Choose two.)
- A. Include all IP addresses in the same subnets shared by the Mobility Controllers.
- B. Verify VLAN configuration on the switch trunks that interconnects the Mobility Controllers.
- C. Exclude all VLANs that are not trunked to each Mobility Controller.
- D. Ensure that the controller IP addresses are in the same subnet.
- E. Configure a separate VRRP group for each cluster member.
Answer: C,D
NEW QUESTION 43
An administrator migrates Aruba Mobility Controllers (MCs) from ArubaOS.6x to ArubaOS.8. x. In the 6.x.
configuration, the administrator configures GRE tunnels on the local controllers to a controller in the DMZ to keep guest traffic off the corporate network. The problem with the solution is that is creates suboptimal routing paths.
Which feature should the administrator implement to solve this problem?
- A. Mobility
- B. AirMatch
- C. Clustering
- D. MultiZone
Answer: A
NEW QUESTION 44
An administrator manages an Aruba wireless network. ClearPass is used to centralize AAA functions. The administrator wants to implement server role derivation.
Which information will the ClearPass server return in regards to the user role assignment?
- A. Aruba VSA Firewall-Role
- B. RADIUS VSA User-Role
- C. Aruba VSA Aruba-User-Role
- D. RADIUS VSA Firewall-Role
Answer: C
NEW QUESTION 45
An administrator manages an Aruba wireless network. ClearPass is used to centralize AAA functions. The administrator wants to implement server role derivation.
Which information will the ClearPass server return in regards to the user role assignment?
- A. Aruba VSA Aruba-User-Role
- B. Aruba VSA Firewall-Role
- C. RADIUS VSA User-Role
- D. RADIUS VSA Firewall-Role
Answer: C
NEW QUESTION 46
An administrator implements blacklisting of users that fail authentication functions three or more times. By default, how long will these users have to wait before they can successfully log into the network again?
- A. 24 hours
- B. 1 hour
- C. 15 minutes
- D. 4 hour
Answer: B
Explanation:
Explanation
https://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Content/ArubaFrameStyles/New_WIP/Clien
NEW QUESTION 47
An administrator defines credentials in the Mobility Master> Configuration> System section to configure a Mobility Master (MM). The administrator then accesses AirWave and adds the MM in Monitor-Only mode.
Theadministrator expects AirWave to automatically discover the Aruba Virtual Mobility Controllers (VMCs) also managed by the MM, but does not see these under APs/Devices> New section in AirWave.
What should the administrator do to solve this problem?
- A. Enable Automatic Device Authorization for the Group the Mobility Master belongs to in AirWave.
- B. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and then scan for the Virtual Mobility Controllers in AirWave.
- C. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, andhave AirWave repoll the Mobility Master.
- D. Define the AirWave communication parameters on the Virtual Mobility Controllers, and then scan for the Virtual Mobility Controllers in AirWave.
Answer: C
NEW QUESTION 48
Refer to the exhibit.
An administrator implements an L2 cluster of Aruba Mobility Controllers (MCs) as shown in the exhibit. An external RADIUS AAA server authentication clients associated with the Active User Anchor Controller (A-UAC), where the NAS IP address sent from Controller B is 10.254.1.2.
By default, what happens to the user's session when it is handed over to the Standby UAC (S-UAC) after a failover?
- A. The user's session is disconnected and has to reconnect, and no record of this process is stored on the AAA server.
- B. The user's session is disconnected and has to reconnect, but the S-UAC automatically updates the NAS-IP address on the AAA server to record the event.
- C. The user's session remains active and RADIUS messages can still be processed between the S-UAC and AAA server.
- D. The user's session remains active, but the AAA server cannot implement RADIUS Change of Authorization (CoA).
Answer: C
NEW QUESTION 49
A cluster has two Aruba 7240 Mobility Controllers (MCs) and two Aruba 7220Mobility Controllers (MCs).
How is the cluster leader elected if all controllers have the default priority?
- A. The controller with the highest MAC address is elected.
- B. The 7240 controller with the lowest IP address is elected.
- C. The controller with the highest IP address is elected.
- D. The 7240 controller with the highest MAC address is elected.
Answer: A
NEW QUESTION 50
What is true about the operation of the Aruba Mobility Controller (MC) shown below?
- A. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.
- B. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
- C. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
- D. The Mobility Master is in disaster recovery mode and will push changes to a Managed Controller.
Answer: B
NEW QUESTION 51
Refer to the exhibit.
What is true about the configuration shown in the exhibit?
- A. This is an ArubaOS controller configured for per-user tunneled node.
- B. This is an ArubaOS-Switch configured for per-user tunneled node.
- C. This is anArubaOS-Switch configured for per-port tunneled node.
- D. This is an ArubaOS controller configured for per-user tunneled node.
Answer: C
NEW QUESTION 52
An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of
10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with thiscluster, reboots it and accesses apboot mode. The administrator executes the printenv command.
Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?
- A. Servername
- B. Cfg_lms
- C. Master_ip
- D. Nodelist
Answer: D
NEW QUESTION 53
A VIA client tries to initially connect to a corporate office controller through an intermediate firewall. However, the VPN connection fails. The administrator examines the firewall rules and determines that rules for UDP
4500 and UDP 500 are configured.
Which additional protocol must be allowed in the firewall rules to resolve this connection failure?
- A. TCP 443
- B. ESP
- C. UDP 8200
- D. TCP 22
Answer: A
NEW QUESTION 54
......
Maximum Grades By Making ready With HPE6-A71 Dumps: https://examcollection.dumpsactual.com/HPE6-A71-actualtests-dumps.html
