350-501 PDF Pass Leader, 350-501 Latest Real Test
Valid 350-501 Test Answers & 350-501 Exam PDF
What is the duration, language, and format of Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
- Language of Exam: English
- Format: Multiple choice
- Validity: 3 years
- Duration of Exam: 120 minutes
Topics Tested in the Cisco 350-501 Exam
The Cisco 350-501 exam focuses on five major topics and requires the candidates to demonstrate the following skills:
- Gaining expertise in implementing the MPLS infrastructure together with describing segment routing and traffic engineering;
- Describing and configuring the VPN services alongside implementing different multicast and QoS solutions;
- Implementing different networking technologies such as the IPv6 and IPv4, BPP, or OSPF;
- Describing the service provider virtualization and architecture as well as knowing how to work with the Cisco network software architecture;
- Configuring different software related to assurance and automation as well as understanding what is the role that the NSO architecture has for the organization’s systems.
NEW QUESTION 116
A network engineer is configuring a router to send multicast traffic for the 239.10.10.10 group. Which configuration must an .... forward the traffic?
- A. Cisco(config)# interface ethernet 1/0 Cisco(config-if)# ip igmp join-group 239.10.10.10
- B. Cisco(config)# interface ethernet 1/0 Cisco(config-if)# ip igmp max-groups action replace
- C. Cisco(config)# interface ethernet 1/0 Cisco(config-if)# ip igmp filter
- D. Cisco(config)# interface ethernet 1/0 Cisco(config-if)# ip igmp access-group 239.10.10.10
Answer: A
NEW QUESTION 117
Which two PHY modes are available to implement an IOS XR Gigabit Ethernet interface? (Choose two.)
- A. nsf Cisco enforce global
- B. nsfletf helper disable
- C. nsf Cisco helper disable
- D. nsf ietf helper strict-isa-checking
Answer: D
NEW QUESTION 118
A remote operation center is deploying a set of l-BGP and E-BGP connections for multiple IOS-XR platforms using the same template. The l-BGP sessions exchange prefixes with no apparent issues, but the E-BGP sessions do not exchange routes. What causes this issue?
- A. A PASS ALL policy has not been implemented for the l-BGP neighbors.
- B. The next-hop-self command is not implemented on both E-BGP neighbors.
- C. The E-BGP neighbors are not allowed to exchange information due to the customer platforms default policy.
- D. The l-BGP neighbors are mistyped and HELLO packets cannot be exchanged successfully between routers.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/routing/configuration/guide/b-routing
NEW QUESTION 119
Refer to the exhibit:
This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to identify traps for SNMP polling
- B. It is used to create a subscription to specify the streaming interval
- C. It is used to identify MIB entries and has a list of YANG models
- D. It is used to create a sensor-group and has a list of YANG models for streaming
Answer: B
NEW QUESTION 120
A network engineer must enable the helper router to terminate the OSPF graceful restart process.
If it detects any changes in the LSA. Which command enables this feature?
- A. nsf ietf helper disable
- B. nsf Cisco helper disable
- C. nsf cisco enforce global
- D. nsf ietf helper strict-lsa-checking
Answer: D
NEW QUESTION 121
Refer to the exhibit.
An engineer configured multicast routing on client's network. What is the effect of this multicast implementation?
- A. R2 is elected as the RP for this domain.
- B. R2 floods information about R1 throughout the multicast domain.
- C. R2 is unable to share information because the ip pirn autorp listener command is missing.
- D. R1 floods information about R2 throughout the multicast domain.
Answer: C
NEW QUESTION 122
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.
Answer:
Explanation:
Explanation
Stateful (It has 1: N translation, It uses address overloading, It conservers IPv4 addresses) Stateless (It is limited on the number of endpoints, It mandates IPv4-translatable IPv6 address allocation)
NEW QUESTION 123
Refer to the exhibit.
An engineer is configuring path selection on router R1 for two ASNs as shown. Which additional task must the engineer perform on Router 1 so that all outbound traffic utilizes the link between R1 and R3 to reach ASN 4567?
- A. Configure a low weigh! on the peer to ASN 4567.
- B. Configure a high weight on the peer to ASN 4567.
- C. Configure an AS path prepend on the peer to ASN 4567.
- D. Configure a high med on the peer to ASN 4567.
Answer: B
NEW QUESTION 124
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: D
NEW QUESTION 125
Refer to the exhibit:
R1 is connected to two service providers and is under a DDoS attack Which statement about this design is true if uRPF in strict mode is configured on both interfaces'?
- A. R1 permits asymmetric routing as long as the AS-RATH attribute entry matches the connected AS
- B. R1 drops destination addresses that are routed to a null interface on the router
- C. R1 drops all traffic that ingresses either interface that has a FIB entry that exits a different interface
- D. R1 accepts source addresses on interface gigabitethernet0/1 that are private addresses
Answer: C
NEW QUESTION 126
Refer to the exhibit:
What does this value mean when it is received in XML?
- A. It indicates a value assigned by a network administrator to tag a route
- B. It means a data fie4d is blank
- C. It shows the ending of the script
- D. It indicates a break in a sequence
Answer: B
NEW QUESTION 127
Which two PHY modes are available to implement an IOS XR Gigabit Ethernet interface interface? (Choose two.)
- A. WDWM
- B. LAN
- C. SONET
- D. MAN
- E. WAN
Answer: A,C
NEW QUESTION 128 
Refer to the exhibit. In which way does router R1 operate differently than router R2?
- A. R1 sends LSA type 2 only and R2 sends LSA type 1 only.
- B. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs.
- C. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs.
- D. R1 sends LSA types 1 and 2, while R2 sends type 1,2, and 7 LSAs.
Answer: D
Explanation:
Section: Networking
Explanation/Reference:
NEW QUESTION 129
Refer to the exhibit.
Which show command should be implemented to display per-interface statistics about uRPF drops and suppressed drops?
- A. show ip traffic
- B. show ip interface brief
- C. showip interface
- D. show cef interface
Answer: C
NEW QUESTION 130
Refer to the exhibit:
What is the URL used for with REST API?
- A. It is used to contact a URL filter to determine the efficacy of a web address
- B. It is used to send a message to the APIC to perform an operation on a managed object or class operator
- C. It is used to initiate an FTP session to save a running configuration of a device.
- D. It is used to send a TACACS+ authentication request to a server
Answer: B
NEW QUESTION 131
Drag and drop the OSPF area types from the left onto the correct statements on the right
Answer:
Explanation:
NEW QUESTION 132
Refer to the exhibit.
A network operator must configure CSR1 interlaces GigabitEihernet2 and GigabitEthemet to rewrite VLAN tags 12 and 21 for traffic between R1 and R2 respectively. Which configurator accomplishes this task?
A)
B)
C)
- A. Option C
- B. Option B
- C. Option A
Answer: A
NEW QUESTION 133
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.
Answer:
Explanation:
Explanation
Stateful (It has 1: N translation, It uses address overloading, It conservers IPv4 addresses) Stateless (It is limited on the number of endpoints, It mandates IPv4-translatable IPv6 address allocation)
NEW QUESTION 134
Refer to the exhibit. The network team must implement MPLS LDP session protection with two requirements:
Session protection is provided for core loopback IP addresses only.
The LDP session must remain operational for one hour when the WAN link on PE-XR1 fails.
Which configuration must the team implement on PE-XR1?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 135
Refer to the exhibit:
Which purpose of implementing NSF with this configuration is true?
- A. The router uses NSF to load balance traffic between two links, with the primary link alternating every
90 seconds - B. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up
- C. The router uses NSF to load balance traffic on a routed EtherChannel
- D. The router uses NSF to reduce neighbor-relationship downtime during RP switchover
Answer: B
NEW QUESTION 136
Refer to the exhibit:
This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows NETCONF uses remote procedure calls.
- B. It shows that the full configuration is being modeled by VANG
- C. It shows that the running configuration is blank
- D. It shows the hostname of the device as rpc-reply
Answer: D
NEW QUESTION 137
After a possible security breach, the network administrator of an ISP must verify the times that several different users logged into the network. Which command must the administrator enter to display the login time of each user that activated a session?
- A. show platform software yang-management process
- B. show netconf-yang sessions detail
- C. show netconf-yang sessions
- D. show netconf-yang datastores
Answer: B
NEW QUESTION 138
Refer to the exhibit.
Which task completes the configuration?
- A. Specify the activate neighbor 192.168.1.2 under the IPv4 address family.
- B. Specify the maximum number of prefixes that R1 receives from neighbor 192.168.1.2.
- C. Specify the source interface in the neighbor statement.
- D. Specify the local-as value in the neighbor statement.
Answer: A
NEW QUESTION 139
Refer to the exhibit.
An engineer must configure router R2 as the new P router in the network. Which configuration must be applied to R2 to enable LDP-IGP Sync on its L2 IS-IS adjacencies?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 140
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
NEW QUESTION 141
......
Conclusion
It is clear that the most suitable IT certifications are subjective and the choice of the best one is connected with your desired career path, your current role, and experience level. However, if your aim is to improve your competence in the field of service provider solutions, Cisco 350-501 is a good test to apply for. Choose the most appropriate track from the options it provides, master the topics diligently, get accredited, and become a source of inspiration to your staff.
350-501 Dumps Ensure Your Passing: https://examcollection.dumpsactual.com/350-501-actualtests-dumps.html
