GET Real EMC D-PM-IN-23 Exam Questions With 100% Refund Guarantee Dec 07, 2024
Get Special Discount Offer on D-PM-IN-23 Dumps PDF
NEW QUESTION # 12
Flexible RAID in PowerMax systems is characterized by which feature?
- A. Fixed RAID configurations
- B. RAID configuration independent of drive type
- C. Dynamic adjustment of RAID levels
- D. Support for RAID 1 and RAID 6 only
Answer: C
NEW QUESTION # 13
A PowerMax 8500 is being installed in a third-party rack.
Which script is launched by the Install script?
- A. Configure System
- B. Configure and Install New
- C. Verify PowerMax Setup
- D. System Setup
Answer: B
NEW QUESTION # 14
What functionalities does the PowerMaxOS 10 operational environment include?
- A. Inline De-dupe and Compression
- B. Flexible RAID and D@RE
- C. Emulation and GuestOS
- D. All of the above
Answer: D
NEW QUESTION # 15
Which statement is true about PowerMax 2500's scalability?
- A. Supports a maximum of 96 NVMe drives
- B. All of the above
- C. Can be configured with up to 2 PowerBricks
- D. Scales up to 1 PB of effective capacity
Answer: C
NEW QUESTION # 16
The IP Switcher tool is being used to connect a service laptop to a PowerMax 8000 to perform a code upgrade.
What happens when the Connect to MMCS button is selected?
- A. Network IP address is changed on the service laptop to the MMCS subnet.
- B. Service laptop reboots to obtain new IP address.
- C. Service laptop prompts if you want to continue.
- D. DHCP is run on the service laptop to initiate automatic connection to MMCS.
Answer: A
NEW QUESTION # 17
In PowerMax 2500 and 8500 cabling, the fabric diagram primarily illustrates which aspect?
- A. Cooling and air flow
- B. Physical layout of the storage bays
- C. Power supply connections
- D. Network and SAN connectivity
Answer: D
NEW QUESTION # 18
Which tool is used for creating custom installation scripts for PowerMax arrays?
- A. Solve Online
- B. Procedure Generator
- C. Simplified Symmwin
- D. CS Tunnel Manager
Answer: B
NEW QUESTION # 19
What is the maximum number of nodes supported on PowerMax 2500 and 8500 arrays?
- A. PowerMax 2500: 4 nodes
PowerMax 8500: 16 nodes - B. PowerMax 2500: 4 nodes
PowerMax 8500: 16 nodes - C. PowerMax 2500: 4 nodes
PowerMax 8500: 16 nodes - D. PowerMax 2500: 4 nodes
PowerMax 8500: 8 nodes
Answer: A
NEW QUESTION # 20
What is the only license format supported for storage systems running PowerMaxOS 10?
- A. INI
- B. CSV
- C. LIC
- D. XML
Answer: D
NEW QUESTION # 21
During PowerMax 2500 and 8500 installations, what is the role of the Install Script?
- A. To provide firmware updates
- B. To guide the physical installation process
- C. To automate the software setup and configuration
- D. To manage user access and security settings
Answer: C
NEW QUESTION # 22
Which of the following features are available in both PowerMax 2500 and 8500?
- A. NVMe over Fabrics support
- B. Built-in machine learning capabilities
- C. Maximum raw capacity of 4 PB
- D. Support for 7.68 TB flash drives
Answer: A,B
NEW QUESTION # 23
What is used to prepare a service laptop to connect to a PowerMax 8000 array?
- A. Central Manager
- B. Simplified Symmwin
- C. Remotely Anywhere
- D. IP Switcher tool
Answer: D
NEW QUESTION # 24
How many InfiniBand switches are installed in a PowerMax 2500?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 25
What is the maximum number of PowerMax 8500 node pairs that can be installed into a single rack, in a dense (unbalanced) rack configuration?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 26
Which is the smallest memory config required to install file services on a PowerMax 2500?
- A. 384 GB DRAM + 512 GB PMEM
- B. 768 GB DRAM + 1 TB PMEM
- C. 768 GB DRAM + 3 TB PMEM
- D. 192 GB DRAM + 256 GB PMEM
Answer: A
NEW QUESTION # 27
During a PowerMax 2500 install, a customer realizes that an additional 10 TB raw capacity is needed for a new application. The PowerMax is configured with RAID 1 using forty-six 3.84 TB drives.
What is the minimum number of 3.84 TB drives that must be installed to meet the requirement?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 28
Which of the following are correct about the bay configurations in PowerMax 2500 and 8500?
- A. Both models allow expansion through additional bays
- B. Both models support up to 96 NVMe drives
- C. PowerMax 8500 supports more NVMe drives than 2500
- D. PowerMax 2500 allows more expansion bays than 8500
Answer: A,C
NEW QUESTION # 29
In a PowerMax 8000 upgrade, what is the role of the Install Script?
- A. To automate the software setup and configuration
- B. To manage firmware updates across the system
- C. To provide user training on new features
- D. To guide the physical installation of new hardware components
Answer: A
NEW QUESTION # 30
How does the PowerMax 2500 model's connectivity options compare to the 8500 model?
- A. It has similar connectivity options
- B. It is designed exclusively for NVMe over Fabrics
- C. It supports a wider range of network protocols
- D. It has fewer front-end host connectivity options
Answer: D
NEW QUESTION # 31
Which software tool is essential for installing PowerMax 2500 and 8500 arrays?
- A. Solve Online
- B. Central Manager
- C. Procedure Generator
- D. All of the above
Answer: D
NEW QUESTION # 32
Which software tool must be used by field personnel to perform the installation script on a PowerMax array?
- A. Solutions Enabler
- B. Unisphere for VMAX
- C. SymmWin
- D. Simplified Symmwin
Answer: D
NEW QUESTION # 33
Which PowerMaxOS emulation is used for back-end drive communication?
- A. ED
- B. IM
- C. DX
- D. DN
Answer: D
NEW QUESTION # 34
What is a key feature of PowerMax 8500 in terms of hardware components?
- A. It uses only SATA drives
- B. It does not support NVMe SSDs
- C. It has a smaller physical footprint
- D. It includes more cache memory than PowerMax 2500
Answer: D
NEW QUESTION # 35
......
PDF Download EMC Test To Gain Brilliante Result!: https://examcollection.dumpsactual.com/D-PM-IN-23-actualtests-dumps.html
