MS-721 Pre-Exam Practice Tests | (Updated 276 Questions)
Valid MS-721 Exam Q&A PDF - One Year Free Update
Microsoft MS-721 certification exam covers various topics related to designing and deploying collaboration and communication solutions using Microsoft technologies such as Microsoft Teams, Skype for Business, Exchange Server, SharePoint Server, and Office 365. MS-721 exam measures the candidate's ability to design and implement solutions that meet the business needs of the organization, including security, compliance, and administration. Collaboration Communications Systems Engineer certification exam requires the candidates to have a deep understanding of the communication and collaboration technologies, their features, and their integration with other Microsoft technologies.
NEW QUESTION # 29
You have a Microsoft Teams Phone deployment.
You are deploying Direct Routing by using a certified Session Border Controller (SBC). The FQDN of the S6C is sbcVcontoso.com. You use signaling port 5067.
You cannot place calls and receive an error message m the Microsoft Teams admin center as shown in the following exhibit.
What is a possible cause of the issue?
- A. The failover timer is set to 0 seconds
- B. The Baltimore root certificate is missing on the SBC.
- C. Location-Based Routing is enabled for the SBC
- D. The Forward P-Asserted Identify (PA!) header is disabled.
Answer: D
NEW QUESTION # 30
You have a Microsoft Teams deployment that uses Teams Premium licensing.
You need to configure Teams webinars to meet the following requirements:
* Display a watermark on shared content.
* Require attendees to answer the default questions on a registration form.
Which type of policy should you use for each requirement? To answer, drag the policy types to the correct requirements. Each policy type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 31
Hotspot Question
You have a Microsoft Teams deployment.
The Global (Org-wide default) settings are configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: Transcription
To enable Microsoft Copilot to recap a Teams meeting, your organization needs a Copilot or Microsoft Teams Premium license, and you must enable transcription for the meeting, either in advanced meeting options or during the meeting itself.
Meeting-specific settings
Enable transcription:
In advance: Go to the meeting invite in your Teams calendar, select Options, scroll to More options, and set Transcription to On.
During the meeting: Click More actions (...) in the meeting toolbar and select Start transcription.
Box 2: Meeting organizers and attendees can
Meeting organizers and attendees can ask Microsoft Copilot for a list of action items during a meeting by using prompts like "List action items". To use this feature, a meeting must be transcribed, and Copilot must be enabled by the organizer. Attendees can then interact with Copilot to get a summary of tasks or have it extract specific action items from the conversation.
Reference:
https://support.microsoft.com/en-us/office/use-copilot-in-microsoft-teams-meetings-0bf9dd3c-
96f7-44e2-8bb8-790bedf066b1
NEW QUESTION # 32
Your company has a branch office named Branch1 that has limited network bandwidth.
The company has a Microsoft Teams Phone deployment.
You need to limit the amount of data the Teams client utilizes when users are in Branch1.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 33
You have a Microsoft Teams Phone deployment and a Session Border Controller (SBC) named SBC1.contoso.
com.
The SBC has SIP over TLS configured to use the default Microsoft port.
You need to implement Direct Routing from the SBC to Teams Phone.
How should you complete the PowerShell command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 34
Your company has a Microsoft Teams Phone deployment and the following departments:
* HR
* Marketing
You need to configure Teams to meet the following requirements:
* Only users in the HR department must have spam filtering enabled.
* All outbound PSTN calls must replace the caller ID with the company's auto attendant number.
* Only users in the marketing department must have Inbound calls can be routed to call groups disabled.
What is the minimum number of caller ID policies and calling policies you should configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 35
You have a Microsoft Teams Phone deployment.
You have a dial plan that contains the following normalization rule:
Pattern: ^8?(\d{7})$
Translation: +1330$1
How will the phone numbers be normalized? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 36
You have a Microsoft Teams Phone deployment.
You need to ensure that users can enter their emergency address into the Teams client.
Which setting should you configure?
- A. Trusted IPs
- B. Optimized device dialing
- C. Location based routing
- D. External location lookup mode
Answer: D
NEW QUESTION # 37
You have a Microsoft Teams deployment.
You have a group named Group1.
You need to remove the virtual appointment and town hall features from the new Teams desktop client for Group1.
Which policies should you configure in the Microsoft Teams admin center for each feature? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 38
You have a Microsoft Teams deployment.
You have two groups that have meeting requirements as shown in the following table.
You need to recommend which type of meeting to use for the groups.
What should you recommend for each group? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 39
You are planning a Microsoft Teams Phone deployment that will use Direct Routing.
You need to allow traffic from Microsoft 365 to a Session Border Controller (SBC).
Which IP address ranges should you allow through the firewall?
- A. 52.112.0.0/14 and 52.122.0.0/15
- B. 10.10.0.0/24 and 10.11.0.0/24
- C. 8.8.8.8/32 and 4.4.2.2/32
- D. 132.245.0.0/16 and 40.104.0.0/15
Answer: A
Explanation:
When deploying Direct Routing in Microsoft Teams, the SBC must be able to communicate with Microsoft 365 services, specifically the Teams service, for call signaling and media transmission.
Microsoft Teams uses specific IP address ranges for this communication.
52.112.0.0/14 and 52.122.0.0/15 IP ranges are used by Microsoft for Teams media traffic and Direct Routing communication. By allowing these ranges through the firewall, you enable your SBC to communicate with Microsoft Teams for handling calls, media, and signaling via Direct Routing.
NEW QUESTION # 40
You have a Microsoft Teams Rooms on Windows system in a local conference room. The system is NOT joined to Active Directory.
You need to ensure that the system can be managed by using RDP.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
NEW QUESTION # 41
You have a Microsoft Teams Phone deployment.
You need to ensure that users can enter their emergency address into the Teams client.
Which setting should you configure?
- A. Trusted IPs
- B. Optimized device dialing
- C. Location based routing
- D. External location lookup mode
Answer: D
Explanation:
Set the External location lookup mode to on to allow your end users to configure their emergency address when they are working from a network location outside the corporate network.
https://learn.microsoft.com/en-us/microsoftteams/manage-emergency-calling-policies
NEW QUESTION # 42
Your company has a Microsoft Teams Phone deployment and the following departments:
* HR
* Marketing
You need to configure Teams to meet the following requirements:
* Only users in the HR department must have spam filtering enabled.
* All outbound PSTN calls must replace the caller ID with the company's auto attendant number.
* Only users in the marketing department must have Inbound calls can be routed to call groups disabled.
What is the minimum number of caller ID policies and calling policies you should configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 43
You have a Microsoft Teams conference room named ConferenceRoom01.
You need to ensure that ConferenceRoom01 can be invited directly to third party online meetings by partner organizations.
How should you complete the PowerShell command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://learn.microsoft.com/en-us/microsoftteams/rooms/third-party-join#step-3a-enable-third-party-meetings-on-teams-rooms-on-windows
NEW QUESTION # 44
You have a Microsoft Teams deployment.
You notice that users erroneously create a live event when attempting to create a meeting from the Teams client calendar.
You need to disable live events for all users.
What should you modify from the Microsoft Teams admin center?
- A. customization policies
- B. Live events settings
- C. live events policies
- D. meeting policies
Answer: C
NEW QUESTION # 45
Your company has offices in 10 countries. The company has a tenant dial plan configured for each country.
The company recently opened an office in a new country.
You need to create a new tenant dial plan that meets the unique dialing requirements of the new country.
What should you do?
- A. From the Microsoft Teams admin center, select Voice select Dial plan, and then select Add.
- B. From the Microsoft Teams admin center, select Voice select Phone numbers, and then select Add.
- C. From the Microsoft Teams admin center, select Locations, select Network topology, and then select Add.
- D. From the Microsoft Teams admin center, select Voice select Calling policies and then select Add.
Answer: A
NEW QUESTION # 46
You use Microsoft Teams live events.
You configure a live events policy as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: only employees
In the exhibit we see: Who can join scheduled live events: Everyone in the organization Box 2: subtitles in different languages We see: Transcription for attendees: On Reference:
https://learn.microsoft.com/en-us/microsoftteams/teams-live-events/plan-for-teams-live-events
NEW QUESTION # 47
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company uses configuration profiles to manage Microsoft Teams-certified IP phones. The Standard configuration profile is applied to the IP phones.
The help desk receives reports that several user phones fail to lock automatically after the timeout period.
You need to verify whether the configuration profile is applied to the problematic phones.
Solution: From Teams Devices in the Microsoft Teams admin center, you locate each affected phone and review the settings on the Details tab.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION # 48
You have a Microsoft Teams Phone deployment.
You have two users that must receive calls for one another.
When a call is received by one user, the other user must only receive a visual notification.
What should you use?
- A. a calling policy
- B. call parte and retrieve
- C. call forwarding
- D. call delegation
- E. group call pickup
Answer: E
Explanation:
The call sharing and group call pickup features of Microsoft Teams let users share their incoming calls with colleagues so that the colleagues can answer calls that occur while the user is unavailable.
Group call pickup is less disruptive to recipients than other forms of call sharing (such as call forwarding or simultaneous ringing) because users can configure how they want to be notified of an incoming shared call (via audio and visual notification, visual only, or banner in the Teams app), and they can decide whether to answer it.
https://docs.microsoft.com/en-us/microsoftteams/call-sharing-and-group-call-pickup
https://support.microsoft.com/en-us/office/set-up-a-delegate-to-take-your-calls-75e8c522-dde0-
45b3-8fd1-8341f19740f9
https://docs.microsoft.com/en-us/microsoftteams/call-park-and-retrieve
NEW QUESTION # 49
You have a Microsoft 365 E5 subscription.
You have a phone that uses Microsoft Skype for Business 3PIP firmware and is connected to an on-premises Skype for Business 2019 environment.
You plan to transition from Enterprise Voice in Skype for Business Server to Microsoft Teams Phone with Calling Plan.
You need to ensure that the phone can make and receive calls by using Teams.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
NEW QUESTION # 50
Your company has a Microsoft Teams deployment.
You have two users that have event group responsibilities as shown in the following table.
The company plans to run a live event for an upcoming product meeting.
Which role should you assign to User1 and User2 to manage the live event? To answer, drag the appropriate roles to the correct users. Each role may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 51
You have a Microsoft 365 subscription that uses Microsoft Teams and contains the groups shown in the following table.
A user named User1 is a member of both Research and Marketing.
You have the meeting policies shown in the following table.
You have group policy assignments for the meeting policies as shown in the following table.
Which policies are assigned to User1?
- A. Policy1 only
- B. Policy2 and Global (Org-wide default)
- C. Policy2 only
- D. Global (Org-wide default) only
- E. Policy1 and Global (Org-wide default)
Answer: C
Explanation:
https://learn.microsoft.com/en-us/microsoftteams/assign-policies-users-and-groups
NEW QUESTION # 52
......
Collaboration Communications Systems Engineer Free Update Certification Sample Questions: https://examcollection.dumpsactual.com/MS-721-actualtests-dumps.html
