Pass Your Salesforce Developer OMS-435 Exam Easily with Accurate PDF Questions [Dec 31, 2023]
OMS-435 Certification Exam Dumps Questions in here
To prepare for the OMS-435 certification exam, candidates should take advantage of the resources available on the Salesforce website, such as training courses, study guides, and practice exams. They should also gain hands-on experience by working on real-world projects and collaborating with other Salesforce professionals. By investing time and effort into preparing for the exam, candidates can increase their chances of passing and earning the prestigious Salesforce OMS-435 certification.
NEW QUESTION # 21
In an Integration Procedure, a developer needs to perform a multi-step calculation on every element of an array.
Based on best practices, what two methods are recommended?
Choose 2 answers
- A. Use a Calculation Action to call a Calculation Procedure.
- B. Use a Matrix Action to call a Calculation Matrix.
- C. Use a Set Values Element inside a Loop Block.
- D. Use a List Action to merge the array elements together.
Answer: A,B
NEW QUESTION # 22
A developer needs to build a multi-step intake form. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?
- A. Add a navigation Action outside each step and set the Element Name to ''Cancel'',
- B. Add a navigation Action inside each step and set the Component name to ''Cancel'',
- C. Check the Enable Cancel checkbox in the Setup tab under Cancel Options.
- D. Add a navigation Action inside each step and set the Element Name to ''Cancel'',
Answer: C
NEW QUESTION # 23
A developer needs to transform contact data into a JSON array.
Given the input JSON shown above, what are two ways a developer could configure a DATARaptor transform to achieve the expected Output JSON? Choose 2 answers
- A. Set the Input JSON path as List(Contact) and the OutputJSON Path as Contact.
- B. Set the Input JSON Path as Contact the out JSON Path as contact and output Data type as List.
- C. Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab.
- D. Set the input JSON Path as Contact and the OutPut JSON Path as List (Contact)
Answer: A,B
NEW QUESTION # 24
Which two fields in an Integration Procedure can use a function like CONCAT or DATEDIFF?
Choose 2 answers
- A. In a Remote Action, in an Additional Output value field.
- B. In Procedure Configuration, in a Tracking Custom Data value field.
- C. In a Remote Action, in a Remote Options value field.
- D. In a Response Action, in an Additional input value field.
Answer: A,D
NEW QUESTION # 25
A developer writes an OmniScript that includes a DataRaptor that updates the Account status based on information provided from the OmniScript. The information must be updated only if the Account record already exists. Otherwise, a new account must be created.
How should the developer accomplish this task?
- A. Populate the Lookup Object and Lookup Fields
- B. Check the Upsert Key checkbox on the Account Status field
- C. Check the Upsert Key and Is Required for Upsert checkboxes on the Account Id field
- D. Check Overwrite Target For All Null Inputs checkbox on the Account Id field
Answer: A
NEW QUESTION # 26
A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, the developer enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?
- A. The AccountId used for the preview is invalid.
- B. The Response cannot be previewed directly.
- C. The DataRaptor Action did not have the add response Ro Response JSON property set to true.
- D. A Response Action was not added to the integration Procedure.
Answer: D
NEW QUESTION # 27
When launching an OmniScript from an action on a FlexCard, the OmniScript displays, but no Salesforce data is populated:
Which two errors could cause this behavior?
Choose 2 answers
Choose 2 answers
- A. There is no active version of the Data Raptor Extract.
- B. There is no active version of the OmniScript
- C. The Id Field for Actions in the FlexCard is blank.
- D. In the DataRaptor Extract Action, the Input Parameters Filter Value is misspelled.
Answer: C,D
NEW QUESTION # 28
In an OmnoScript, a developer needs to configure a Disclosure element to require user input only if the user already checked a Non-Disclosure Agreement Checkbox.
How should the developer configure the conditional view to meet this requirement?
- A. Show element if true
- B. Set element to require if true
- C. Disable read only if true
- D. Set element to optional if false
Answer: A
NEW QUESTION # 29
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developer configure the FlexCard to display the case records in this way?
- A. Enable the Repeat Records feature on the FlexCard Setup tab
- B. Select the Repeatable Mode property on the data table elements
- C. Disable the Repeat Record feature on the FlexCard setup tab
- D. Enable the record Looping feature on the data table elements
Answer: C
NEW QUESTION # 30
A developer needs to transform contact data into a JSON array.
Given the input JSON shown above, what are two ways a developer could configure a DATARaptor transform to achieve the expected Output JSON? Choose 2 answers
- A. Set the Input JSON path as List(Contact) and the OutputJSON Path as Contact.
- B. Set the Input JSON Path as Contact the out JSON Path as contact and output Data type as List.
- C. Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab.
- D. Set the input JSON Path as Contact and the OutPut JSON Path as List (Contact)
Answer: A,B
NEW QUESTION # 31
A customer has a new Engagement Manager who is going to be the new Primary Contact for the Account.
What type of mapping does a DataRaptor Load use to create the new contact and then add it as the new Primary Contact?
- A. Relationship Query
- B. Lookup Key
- C. Linked Mapping
- D. Lookup Mapping
Answer: C
NEW QUESTION # 32
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with actions to close the case and update the case, and it will be styled using the Community's theme.
What must the developer do to configure the FlexCard for deployment in a Community?
- A. Set the Target property in Publish Options to "CommunityPage"
- B. Add the FlexCard's API name to the FlexCard Player component
- C. Set the Deployment property in Card Configuration to "Community"
- D. Configure the Component Visibility in the Custom Component
Answer: A
NEW QUESTION # 33
A developer need to use the CONTIF function to process data entered by the user in an OmniScript. The output of the function needs to be displayed to the user immediately in the current step.
Based on best practice, what element should the developer use this function in?
- A. A formula element
- B. A Set Values element
- C. A Calculation Action element
- D. A Range element
Answer: A
NEW QUESTION # 34
A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Deactivate the contextId key/value pair
- B. Update the ContextId value to specify an id from the Production org.
- C. Add a Show/Hide condition on the Set Values element.
- D. Delete or Deactivate the Set Values element.
Answer: D
NEW QUESTION # 35
A developer needs to build a DataRaptor Transform to send current weather to both an OmniScript Card Layout. Which of these samples would be valid for the Expected Output JSON?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: C
NEW QUESTION # 36
Refer to the exhibit below.
What is the reason that the fields fail to display the fetched data?
- A. Lookup Mode is selected in the properties of the Type Ahead Block.
- B. Use Data JSON is Not selected in the properties of the Type Ahead Block.
- C. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
- D. The typeHead key is not in the correct format.
Answer: C
NEW QUESTION # 37
Which calculation procedure version in the list would execute on 2/15/2020 at 12:00 PM?
- A. Version Number 4
- B. Version Number 1
- C. Version Number 2
- D. Version Number 3
Answer: C
NEW QUESTION # 38
......
Salesforce OMS-435 certification exam covers a range of topics related to building guided experiences with OmniStudio, including designing, configuring, and deploying custom applications using the Salesforce platform. It also covers topics such as data modeling, integrations, security, and deployment. OMS-435 exam is suitable for Salesforce developers, administrators, and consultants who want to enhance their skills and knowledge in building custom applications.
By passing the Salesforce OMS-435 certification exam, individuals can demonstrate their proficiency in using OmniStudio to create customized and interactive guided experiences for their customers. They can also gain recognition as certified experts in Salesforce guided experiences and enhance their career opportunities in the Salesforce ecosystem.
Updated OMS-435 Exam Practice Test Questions: https://examcollection.dumpsactual.com/OMS-435-actualtests-dumps.html
